UL 970-2020 pdf download – Retail Fixtures and Merchandise Displays.
2.25 CONTROL, AUXILIARY – A device or assembly of devices that provides a functional utility, is not relied upon as an operational or protective control, and therefore is not relied upon for safety. For example, an efficiency control not relied upon to reduce the risk of fire, electric shock, or injury to persons during normal or abnormal operation of the end product is considered an auxiliary control. 2.26 CONTROL CIRCUIT – A system of components that may include programmable logic devices other than a thermal protector or a motor current protector that has the ability to detect the condition of a display’s operation or that controls a display function. 2.27 CONTROL, MANUAL – A device that requires direct human interaction to activate or rest the control. 2.28 CONTROL, OPERATING – A device or assembly of devices, the operation of which starts or regulates the end product during normal operation. For example, a thermostat, the failure of which a thermal cutout/limiter or another layer of protection would reduce the risk of fire, electric shock, or injury to persons, is considered an operating control. 2.29 CONTROL, PROTECTIVE – A device or assembly of devices, the operation of which is intended to reduce the risk of electric shock, fire or injury to persons during normal and reasonably anticipated abnormal operation of the appliance. For example, a thermal cutout/limiter, or any other control/circuit relied upon for normal and abnormal conditions, is considered a protective control. (During the testing of the protective control/circuit, the protective functions are verified under normal and single-fault conditions of the control.) 2.30 CONTROL, TYPE 1 ACTION – The actuation of an automatic control for which the manufacturing deviation and the drift (tolerance before and after certain conditions) of its operating value, operating time, or operating sequence has not been declared and tested under this standard.
2.46 FIELD-WIRING TERMINAL – A terminal to which a conductor is intended to be connected in the field. 2.47 FURNITURE POWER DISTRIBUTION UNIT – An outlet assembly that complies with the Standard for Furniture Power Distribution Units, UL 962A. 2.48 GLASS, SHEETS – A glass sheet, usually formed from sheet stock, the overall shape of which is essentially flat. The sheet can have a slight curvature or bend, and the surface may be smooth or textured. 2.49 INSULATION, BASIC – Insulation applied to live parts to provide basic protection against electric shock. 2.50 INSULATION, SUPPLEMENTARY – A separate layer of insulation that is provided in addition to the basic insulation to reduce the risk of electric shock in the event of breakdown of the basic insulation. 2.51 ISOLATED SECONDARY CIRCUIT – A circuit derived from an isolated secondary winding of a transformer and that has no direct connection back to the line-connected circuit (other than through grounding means). A secondary circuit that has a direct connection back to the line-connected circuit is determined to be part of the line-connected circuit. 2.52 KIOSK – A small open-fronted cubicle from which newspapers, refreshments, tickets, and other types of merchandise is sold. 2.53 LEAKAGE CURRENT – All currents, including capacitively coupled currents that flow through a person upon contact between accessible conductive surfaces of a product and ground or other accessible surfaces of the product. 2.54 LIMITED POWER SOURCE (LPS) – An isolated limited power source is as defined in the Standard for Information Technology Equipment – Safety – Part 1: General Requirements, UL 60950-1, and shall comply with the requirements of UL 60950-1.
