IEC 61800-2:2021 pdf download – Adjustable speed electrical power drive systems – Part 2: General requirements – Rating specifications for adjustable speed AC power drive systems.
2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60034 (all parts), Rotating electrical machines IEC 60038, IEC standard voltages IEC 60050-1 1 2, International Electrotechnical Vocabulary (IEV) – Part 112: Quantities and units (available at www.electropedia.org) IEC 60050-1 1 3:201 1 , International Electrotechnical Vocabulary (IEV) – Part 113: Physics for electrotechnology (available at www.electropedia.org) IEC 60050-1 1 4, International Electrotechnical Vocabulary (IEV) – Part 114: Electrochemistry (available at www.electropedia.org) IEC 60050-1 51 , International Electrotechnical Vocabulary (IEV) – Part 151: Electrical and magnetic devices (available at www.electropedia.org) IEC 60050-1 61 , International Electrotechnical Vocabulary (IEV) – Part 161: Electromagnetic compatibility (available at www.electropedia.org) IEC 60050-1 92, International Electrotechnical Vocabulary (IEV) – Part 191: Dependability (available at www.electropedia.org) IEC 60050-441 , International Electrotechnical Vocabulary (IEV) – Part 441: Switchgear, controlgear and fuses (available at www.electropedia.org) IEC 60050-442, International Electrotechnical Vocabulary (IEV) – Part 442: Electrical accessories (available at www.electropedia.org)
IEC 60721 -3-3:1 994, Classification of environmental conditions – Part 3: Classification of groups of environmental parameters and their severities – Section 3: Stationary use at weather protected locations IEC 60721 -3-3:1 994/AMD1 :1 995 IEC 60721 -3-3:1 994/AMD2:1 996 IEC 60721 -3-4:1 995, Classification of environmental conditions – Part 3: Classification of groups of environmental parameters and their severities – Section 4: Stationary use at non- weather protected locations IEC 60721 -3-4:1 995/AMD1 :1 996 IEC 61 800-3, Adjustable speed electrical power drive systems – Part 3: EMC requirements and specific test methods IEC 61 800-5-1 , Adjustable speed electrical power drive systems – Part 5-1: Safety requirements – Electrical, thermal and energy IEC 61 800-5-2:201 6, Adjustable speed electrical power drive systems – Part 5-2: Safety requirements – Functional IEC TR 61 800-6, Adjustable speed electrical power drive systems – Part 6: Guide for determination of types of load duty and corresponding current ratings IEC 61 800-7 (all parts), Adjustable speed electrical power drive systems – Part 7: Generic interface and use of profiles for power drive systems IEC 61 800-7-1 , Adjustable speed electrical power drive systems – Part 7-1: Generic interface and use of profiles for power drive systems – Interface definition IEC TS 61 800-8, Adjustable speed electrical power drive systems – Part 8: Specification of voltage on the power interface IEC 61 800-9-1 , Adjustable speed electrical power drive systems – Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications – General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analytic model (SAM) IEC 61 800-9-2, Adjustable speed electrical power drive systems – Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications – Energy efficiency indicators for power drive systems and motor start
3.5 commissioning test test on a device or equipment carried out on site, to prove the correctness of installation and operation [SOURCE: IEC 60050-41 1 :1 996, 41 1 -53-06, modified – The word “machine” has been replaced by “device”.] 3.6 complete drive module CDM drive module consisting of, but not limited to, the BDM and extensions such as protection devices, transformers and auxiliaries, but excluding the motor and the sensors which are mechanically coupled to the motor shaft SEE Figure 3. 3.7 converter <of the BDM> unit which changes the form of electrical power supplied from the mains supply to the form required by the motor(s) by changing one or more of the following; voltage, current and/or frequency SEE Figure 3. Note 1 to entry: The converter comprises electronic commutating devices and their associated commutation circuits. It is controlled by transistors or thyristors or any other power switching semiconductor devices. Note 2 to entry: The converter can be line-commutated or self-commutated and can consist for example of one or more rectifiers. 3.8 customer <of the BDM/CDM/PDS> original equipment manufacturer (OEM), system integrator or end user specifying and purchasing a BDM/CDM/PDS from the BDM/CDM/PDS manufacturer See Figure 1 .